Peripheral devices for computing digitization of traditional paper patterns
Digitizers are devices for introducing traditional (paper) patterns of any size into computer memory (so called patterns digitization). We offer classic electronic digitizers of various sizes and modern, innovative photodigitization devices. Especially we recommend a very fast and accurate method of photodigitization with using magnetic boards. These boards allows to digitize many of patterns in a very short time and with help of InvenTex software they can be sharing in digital form for use in other CAD systems available on the market. Traditional digitizers are devices that can work directly with other CAD systems, while their speed and accuracy can be slightly smaller.
Below are grouped functionally offered devices (list can be easily filtered using the available buttons):
AllClassic tablePhotodigitizerScanners
Wide format scanners for photodigitizing of patterns
Wide format scanner is an advanced hardware solution meant for processing images of paper-made patterns to digital domain. Scanner is reading data which are then processed by photodigitizing module of the InvenTex CAD system.
Mobile flatbed scanners A3/A4
One of three methods allowing to input data into the InvenTex IPD photodigitizing module is to scan patterns made of paper using a hardware scanner. See pre-selected mobile scanners and flatbed scanners with bigger format A3 and classic A4.
Digitizers InvenGraph A0 and A00 format
Digitizer allows for enterning traditional (paper-made) patterns shapes of arbitrary length to the computer’s memory. A0+ digitizer has a working area of 122 x 152 cm and it’s installed on column base with adjustable height and tilt angle, assuring comfortable and effective usage. It’s an alternative solution to the photodigitizing process.
Photodigitizing table
Photodigitizing is an innovative method of patterns images processing, which were taken using a digital camera and photodigitizing table. Economical installation of the photodigitizing table on the wall allows to minimize requied space in the CAD department facilities. Size of table depends on sizes and quantity of digitized patterns.
Digitizers InvenGraph ID-1824C A2 Format
Digitizer with compact size allowing to put it in almost any place, eg. operator’s desk. It’s perfect for digitization of smaller patterns, can also digitize bigger dimensions of patterns. Working area of 46 x 61 cm.
