Expert Landscape Design Rules - Landscaping Network (2024)

How to design a garden that seamlessly combines architecture with landscapeDuncan Heather, guest writer for Landscaping Network and principal at the Oxford College of Garden Design

Swipe to view slides

Rule 1: The House is the Most Important Part of Any Garden

You can't ignore it! It's almost always the largest, most dominant structure in the garden. Your journey starts and ends with the house and therefore any garden plan, should always start from the building and work outwards.

Rule 2: The Designers Main Objective is to Link Building with Site

Probably the most important rule of all and yet the one that is least understood. This rule applies to any landscape scheme, whether residential or commercial. If the design is to be successful, then it must blend the building seamlessly into its environment. To achieve this, the designer needs to be able to combine symmetry with biology, i.e. architecture with landscape. Because most buildings are made from geometric shapes and the garden is essentially a biological environment, great care is needed to join these two opposing forms together. Try linking them too quickly and they will clash, creating a meaningless amorphous squiggle where the house looks like it's just landed from space.

Rule 3: All Shapes Close to the House Should be Symmetrical

This follows on from rule 2. Because the building is predominantly made up of straight lines based on squares and rectangles, the area around the building should copy these geometric, mathematical shapes to help link the house with the garden. The terraces, paths, formal pond and planting beds should be designed using straight lines.

If you don't believe me, I will try to convince you by using an interior design analogy. "You would not put an amoebic shaped rug into a rectangular shaped room. Instead you would use a symmetrical rug/carpet." The same rules of interior design are just as relevant for outside design. The lawn is the carpet of the garden and the worst thing you can do, is to put a wiggly edged lawn into a rectangular shaped garden. Creating wiggles and squiggles won't make your garden look natural. Nature makes it natural! As soon as you add planting to a straight edged border the plants grow and spill over and soften all the hard lines.

Rule 4: Use a Grid to Help you Design

Because you want your garden to link back to the house, it makes sense to use shapes and pattern on your plan, that relate back to the scale and proportion of the building. "The Scale of the Grid is derived from the Mass of the Property". Every grid is unique to site. This may in reality appear subliminal, but using a grid which is derived from the proportions and scale of the building means that all the patterns you use for the garden plan, relate directly back to the house and the grid also acts as a guide for the designer so they can quickly check size and scale of different features.

Rule 5: There are No Rules

This isn't strictly true because I have just given you a small sample of some. However you first need to understand the rules of geometry and design before you can break them. If we all stuck rigidly to rules, we would end up with some very dull design, but conversely, few universities and colleges give any clear guidance to design teaching, so that students graduate without a clear design philosophy.

At the Oxford College of Garden Design we run a professional on-line postgraduate level course and together with our sister site MyGardenSchool we also offer 4 week on-line short courses in all aspects of gardening. One of the main reasons our students have been so successful, is that we do teach a design philosophy by verbalising and explaining why something works and why something doesn't.

Read about eight more landscape design principles on GardenDesign.com.

Related Reading:

How to Landscape

Garden Layouts

Landscape Plans

Expert Landscape Design Rules - Landscaping Network (2024)

FAQs

What are the 7 steps to landscape design? ›

  1. Step 1: Plan a Landscape Project. Like any home project, planning is one of the most important aspects of re-landscaping your yard. ...
  2. Step 2: Remove the Lawn. ...
  3. Step 3: Install Hardscape. ...
  4. Step 4: Build a Healthy Soil. ...
  5. Step 5: Install an Irrigation System. ...
  6. Step 6: Purchase & Install Plants. ...
  7. Step 7: Water Efficiently.

What are the 5 elements of landscape design? ›

An aesthetic landscape design incorporates five key elements: line, form, texture, color and scale. The perfect balance of these design features appeals to the eye and brings harmony to a space.

What are the 10 principles of landscape design? ›

The principles of landscape design include the elements of unity, scale, balance, simplicity, variety, emphasis, and sequence as they apply to line, form, texture, and color. These elements are interconnected. Landscape design is a process of developing practical and pleasing outdoor living space.

What is the rule of three in landscape design? ›

Three plants creates balance

If you have enough space, group them in an equilateral triangle. This looks particularly good with mounding or vertical plants. Be sure to leave some space between the plants, especially if they are three different kinds.

What are the rules of landscape design? ›

When it comes to landscape design concept ideas, Dixie Sandborn at Michigan State University believes there are six fundamental principles that should be incorporated into the plan:
  • • Balance. ...
  • • Focalization. ...
  • • Simplicity. ...
  • • Rhythm and Line. ...
  • • Proportion. ...
  • • Unity. ...
  • The Law of Significant Enclosure. ...
  • The Regulating Line.

What are the three principles of landscape design? ›

Design principles guide designers in organizing elements for a visually pleasing landscape. A harmonious composition can be achieved through the principles of proportion, order, repetition, and unity. All of the principles are related, and applying one principle helps achieve the others.

What are the hard elements of landscape? ›

Hard landscaping most commonly refers to elements such as paths, driveways, drainage systems, electrics, fencing, decking, patios, steps and walls. These elements then provide the base for soft landscaping elements such as grass, plants, and vegetation.

What are the colors for landscape design? ›

Strong and bright colors like reds, yellows, and greens are said to make people feel more energized. They can also be attention-grabbing and really stand out from the rest of the landscape. But colors that are more muted like lighter pastel shades, pinks, and whites can make people feel calmer.

What are the 4 main parts of a landscape painting? ›

Students will study the composition of landscape paintings, emphasizing space, depth, and the concepts of foreground, middle ground, and background.

What are the 11 rules of design? ›

These 12 principles, explained in the infographic below, include contrast, balance, emphasis, proportion, hierarchy, repetition, rhythm, pattern, white space, movement, variety, and unity (there are also some additional Gestalt principles of design).

What are the 12 principles of design? ›

The 12 Principles of Design
  • Balance.
  • Contrast.
  • Emphasis.
  • Hierarchy.
  • Movement.
  • Pattern.
  • Proportion.
  • Repetition.

What is unity principles of landscape design? ›

Unity in landscape design occurs when all the different elements of a design composition come together to convey a sense of oneness. This is done through repetition and consistency. A theme should be chosen that is harmonious with the character of the house and land on which it is built.

What is the 2 3 rule in design? ›

“The 2:3 design rule suggests your sofa should be the equivalent of ⅔ the size of your room.” However, if your living room is also your dining room or home office, that may not be possible, explains the designer.

What are the 3 concepts of a landscape? ›

One method of describing landscapes divides a landscape into three basic elements: patches, corridors or buffers, and matrix (fig. 2). Figure 2 — The landscape described in basic landscape ecology terms.

What are the design steps in landscape? ›

The five steps of the design process include: 1) conducting a site inventory and analysis, 2) determining your needs, 3) creating functional diagrams, 4) developing conceptual design plans, and 5) drawing a final design plan.

What is the first step in landscape design? ›

The process begins with a site inventory and analysis of soil, drainage, climate conditions, and existing vegetation. This is a critical step for both plant selection and placement and for locating family activities and functions.

Top Articles
Latest Posts
Article information

Author: Zonia Mosciski DO

Last Updated:

Views: 5740

Rating: 4 / 5 (71 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Zonia Mosciski DO

Birthday: 1996-05-16

Address: Suite 228 919 Deana Ford, Lake Meridithberg, NE 60017-4257

Phone: +2613987384138

Job: Chief Retail Officer

Hobby: Tai chi, Dowsing, Poi, Letterboxing, Watching movies, Video gaming, Singing

Introduction: My name is Zonia Mosciski DO, I am a enchanting, joyous, lovely, successful, hilarious, tender, outstanding person who loves writing and wants to share my knowledge and understanding with you.