John Deere Z920M Parts Diagram (2024)

FAQs

How much horsepower does a John Deere Z920M have? ›

Powerful 23.5-hp (17.5-kW) commercial-grade engine delivers class-leading performance and efficiency. The Z920M is powered by an air-cooled, vertical shaft engine: 23.5-hp (17.5-kW) gas engine.

Tires - Drive wheels:

24x9. 5-12 (48 in.), 24x12-12 (54 in., 60 in.)

11.5 U.S. gal. 0.25 in. 1-5.5 in.

X300 Select Series Lawn Tractors.

It is the new 9RX 830, an articulated unit driven by an engine of 18,000 cc and 830 hp rated power (913 hp maximum power).

Low-profile tires (also known as “low pro tires”) are generally street performance tires such as performance all-season, summer, ultra-high performance and competition tires that go on larger diameter wheels and necessitate shorter overall sidewall heights. (Also known as aspect ratio.)

B: TIRE WIDTH

The three-digit number following the letter is the tire's width (from side to side, looking at the tire head-on) in millimeters. This may also be referred to as the section width.

265/70R17 tires have a diameter of 31.7" (804 mm), a tread width of 10.4" (265 mm), and a wheel diameter of 17" (431.8 mm). The sidewall of the tire is 7.3" (186 mm), and the tire's circumference is 99.5" (2524.6 mm). This means a 265/70R17 tire will make make 637 revolutions per mile, or 396 revolutions per kilometer.

John Deere recommends you check your oil level before each use and change your oil once a season. That's about every 50 hours of use.

What oil does John Deere recommend? ›

Plus-50™ II Premium Engine Oil

Recommended by engineers who design, develop, and test John Deere engines. Formulated to perform up to 500 hours in your John Deere engine*.

Extra reliability and long life with cast-iron blade spindle housings. Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.

The Z950M and Z950R are powered by an air-cooled, vertical shaft engine: 27-hp (20.1-kW) gas engine.

The first number denotes the size and family of the tractor and the next three numbers specify the approximated engine horsepower.